INDUSTRY SOLUTIONS
Customer Pain Points
-
Needs to test the actual deliverable composite part
-
Needs Non-Destructive (NDT) inspection capabilities
-
Needs real time & tighter In-process Quality Control
-
Determining Composite material variability & uniformity
-
Product cure verification of anisotropic material
-
-
Needs to reduce scrap / waste while increasing production efficiencies
-
Needs real-time Material EM Properties / Characterization
-
In liquid / resin state
-
In powder state
-
In-process high temp. conditions
-
In solids; pre or post “cooking”
-
-
Needs to inspect for defect;
-
Moister Levels
-
Surface; dents, strikes, F.O.D.
-
Composite material repair quality
-
MWI’s NDT Solution is a mature & proven Technology-
“Composite NDT is where MWI really shines”
MWI has disruptive microwave NDT technologies that are transforming manufacturing processes from Aerospace to Pharmaceuticals
Proven Customer Benefits
Customer proven results from implementing our QA/QC system
-
Received real-time controllability
-
At frequency of interest
-
Line speeds >300 ln.ft./min.
-
-
Increased process uniformity by >52 %
-
Reduce scrap rate by 80%
-
ROI of $380K system was <4 months
Typical Manufacturing Results
-
Increased Production Efficiencies by 60%
-
Increased Production Speeds by 3x (40 to 120 ln.ft/min.)
-
(>6x is achievable)
-
-
Reduced Scrap & Waste by 80%
-
Eliminated Sample Preparations & Machining / Fabrication
-
Reduced Labor Requirements
-
ROI: 2 to 6 Months (application dependent)
*Click the above Industry tabs to learn more about our Solutions & Benefits*
